Gloss Tyre delivers a deep, wet-look shine to tyre sidewalls and adds UV protection to prevent the rubber from fading, drying, and developing the chalky grey appearance that makes even a clean car look neglected. It's engineered to stay on the tyre rather than slinging onto the paintwork when you drive away — a problem with a lot of cheaper tyre products.

How to use: Make sure the tyres are clean and fully dry before applying — dirt and moisture under a dressing will prevent it bonding properly. Apply a small amount to a Tyre Puck or foam applicator pad and work into the tyre sidewall with even, circular strokes, covering the full sidewall from the rim edge to the tread shoulder. Allow to cure for at least 5–10 minutes before driving. For a more intense, high-gloss finish, apply a second thin coat once the first has dried. Thin coats give better, longer-lasting results than one heavy application.

Tip: Always apply to clean, degreased tyres — old build-up of silicone from previous products will prevent a new coat from bonding properly. If the tyres have heavy product build-up, clean them back with an APC before applying a fresh coat.