MaxShine Snowfoam Cannon V2

The MaxShine Snowfoam Cannon V2 is a professional-grade foam cannon that threads onto any standard 1/4-inch quick-release pressure washer lance and produces thick, consistent, clinging foam on demand. Fully adjustable — the concentration dial controls foam density from a light rinse-aid film to a thick, heavy blanket, and the spray nozzle adjusts from a wide fan to a concentrated jet. Built from high-quality materials that hold up to regular use.

How to use: Unscrew the bottle and fill with your chosen snow foam (such as Arctic Wipeout or Ceramic Foam) diluted with water according to the product instructions. Leave space at the top of the bottle — a full bottle has no room for the air that helps create foam. Screw the cannon back onto your lance. Start from the bottom of the vehicle and work upward in overlapping horizontal passes until fully covered. Leave to dwell for 5–10 minutes, then rinse from the top down with your full pressure washer flow. Adjust the dial to dial in the foam density that your particular pressure washer produces best results with.

Tip: The quality of foam varies significantly between pressure washers — higher flow rate washers generally produce thicker foam. Start with a richer product-to-water ratio and dial back if needed. Rinse the cannon bottle with clean water after every use to prevent product build-up in the nozzle.